Engineering, 27.10.2020 02:10 mariahgriego4126

Match each scenario with the term it represents. As an engineer designs a new truck, he creates a model that has its sides unfolded so the client is able to see the front view through the center of the drawing.

Kelly has just completed a drawing of a model that allows the client to see the product in three dimensions with every axial view visible. This allows the client to envision the entire product.

John has been working on the design for a new video recorder. At this point he just needs to show the client a sketch of the recorder from the front so that all the functional buttons are visible.

Isometric

Third-angle projection

orthographic

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

Answer

You know the right answer?

Match each scenario with the term it represents. As an engineer designs a new truck, he creates a m...

Questions