Engineering, 27.10.2020 17:20 liana8
A 40-mm-thick plate was rolled down to 30 mm in one pass. The entrance speed was 16 m/min. Roll radius was 300 mm, and the mill was running at a speed of 18.5 m/min.. Determine:1. The minimum required coefficient of friction 2. The exit velocity, if the plate width increases by 2%3. Forward slip
Answers: 2
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
A 40-mm-thick plate was rolled down to 30 mm in one pass. The entrance speed was 16 m/min. Roll radi...
World Languages, 17.09.2019 04:30
Health, 17.09.2019 04:30
History, 17.09.2019 04:30
History, 17.09.2019 04:30
English, 17.09.2019 04:30
History, 17.09.2019 04:30
Mathematics, 17.09.2019 04:30
Mathematics, 17.09.2019 04:30
Mathematics, 17.09.2019 04:30
History, 17.09.2019 04:30
Mathematics, 17.09.2019 04:30
History, 17.09.2019 04:30
Mathematics, 17.09.2019 04:30