Engineering, 28.10.2020 20:10 nicollexo21
Copper Pipe and tubing can be joined with which of the following fittings?
Compression fittings
Sweat(soldered) fittings
All of these are correct
Crimp or press fittings
Answers: 3
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Copper Pipe and tubing can be joined with which of the following fittings?
Compression fittings
Computers and Technology, 17.06.2020 19:57
Mathematics, 17.06.2020 19:57
Mathematics, 17.06.2020 19:57
Mathematics, 17.06.2020 19:57
Mathematics, 17.06.2020 19:57
Medicine, 17.06.2020 19:57