subject
Engineering, 29.10.2020 07:30 angelcjsdfv7139

9. Technicians A and B are discussing hybrid engines. Technician A says that idle stop in HEVs and EREVs is a safety feature for technicians. Technician B says that high viscosity engine oil should be used with most hybrid electric vehicles. Who is correct?
A. Technician B
B. Both Technicians A and B
C. Neither Technician A nor B
D. Technician A
What is the right answer

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
9. Technicians A and B are discussing hybrid engines. Technician A says that idle stop in HEVs and E...
Questions
Questions on the website: 13722361