1.000 -1.000
A -
.125
01.252+.003
$1.500
TITZ
A -
SECTION A-A
SELECT ALL THAT APPLY
a The bushing diameter must be at least 1.000 inches but
can be no more than 1.005 inches.
b The bushing diameter must be greater than 1.000 inches
or less than 1.000 inches.
c The upper limit dimension is 1.005 inches
d The actual diameter of the hole is 1.000 inches

Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.