subject
Engineering, 31.10.2020 05:10 natu2072

An engineering firm is developing a bridge for trains using recycled materials. It is building prototypes of the bridge to be tested. Which statement best explains why prototyping can be important? A. Building a prototype allows conductors to use the proposed bridge while it is still being tested.

B. Building a prototype allows all brainstormed bridge designs to be modeled.

C. Building a prototype allows the most promising bridge design to be tested in a safe manner.

D. Building a prototype allows the constraints for the bridge to be ignored.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
You know the right answer?
An engineering firm is developing a bridge for trains using recycled materials. It is building proto...
Questions
question
History, 21.09.2020 14:01
question
Mathematics, 21.09.2020 14:01
question
Mathematics, 21.09.2020 14:01
Questions on the website: 13722361