subject
Engineering, 05.11.2020 18:50 lizzyhearts

If a specimen of this steel is solutionized (aka, annealed to equilibrium) at 800°C, rapidly cooled to 550°C and is held at 550°C for 3 seconds, and is then quenched to room temperature, what constituents will make up the microstructure? a. Bainite and Martensite
b. Pearlite
c. Martensite
d. Austenite and Martensite
e. Austenite
f. Pearlite and Martensite
g. Austenite and Pearlite
h. Bainite

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
If a specimen of this steel is solutionized (aka, annealed to equilibrium) at 800°C, rapidly cooled...
Questions
question
Mathematics, 09.10.2020 21:01
question
Biology, 09.10.2020 21:01
Questions on the website: 13722360