Demountable rims installed on spoke wheel ends must be:
A) tightened to prevent movement.
B)...
Engineering, 05.11.2020 20:10 saykblahwah309
Demountable rims installed on spoke wheel ends must be:
A) tightened to prevent movement.
B) centered on wheel ends.
C) checked for lateral run-out.
D) tightened in a star pattern.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
You know the right answer?
Questions
Chemistry, 06.09.2019 18:10
Chemistry, 06.09.2019 18:10
Computers and Technology, 06.09.2019 18:10
English, 06.09.2019 18:10
History, 06.09.2019 18:10
Spanish, 06.09.2019 18:10
