Engineering, 07.11.2020 20:00 710jonathan

Read through the paragraph on personal protective equipment on page 2 and fill in the blanks using the list of words below. Each word is used only once. Sewers
Ear defenders
Replaces
Drop
Hazards
Dust mask
Hands
Employer
Safety boots
85db
Protect
Falling objects
Tread
Helmet
Gauntlets
Responsibility
Noise
PPE

I have just started a new job, and it is the responsibility of my to supply the correct PPE for me to wear. PPE is designed to me against workplace . When we go on site I need good strong to protect my feet from things like dampness, in case I something on my foot and also in case I on an up-turned nail. My boss always asks me to use safety gloves to protect my . In fact, once I had to wear arm-length when we were working on some |On site I also have to wear a safety all the time. This is a good thing because it protects my head from any . Working with other trades, such the carpenters, can be hazardous because they make lots of with their power tools. If the noise is above we have to use , otherwise my hearing could be damaged. Because of all the sawdust they create when they are cutting wood, they regularly have to wear a , which stops them breathing in the dust.

I have to look after all the my boss gives me, as it is my . If something gets broken, he it for me as he does not want to get in to trouble with the HSE.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

You know the right answer?

Read through the paragraph on personal protective equipment on page 2 and fill in the blanks using t...

Questions