subject
Engineering, 12.11.2020 17:50 nylahnwalker

1. In an internal combustion engine, fuel is burned the engine.
2. In the
stroke of the four-stroke cycle, the piston rises, compressing the air-and-
fuel mixture trapped in the combustion chamber.
3. In an engine, the stroke is the distance the piston
4. When a piston is at its lowest position in the cylinder, it's said to be at
5. During the
stage of engine operation, gases are released from the cylinder.
6. A four-stroke engine will contain at least two mechanical valves called the
valve
and the
valve
7. In the
stroke of the four-stroke cycle, air mixed with fuel is drawn into the
cylinder.
8. The total engine
I is stated as the volume of the space swept through by all the
pistons.
9.
A two-stroke engine completes all four stages of engine operation in four piston
strokes
10. During the
stroke of the four-stroke cycle, the mixture of air and fuel is ignited,
and the contained explosion of the fuel presses the piston back down in the cylinder.
11. The top of a cylinder is sealed by the cylinder
12. The
is the ratio of the total cylinder volume to the clearance volume.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
1. In an internal combustion engine, fuel is burned the engine.
2. In the
stroke of the...
Questions
question
Mathematics, 22.07.2019 02:00
question
History, 22.07.2019 02:00
question
Social Studies, 22.07.2019 02:00
Questions on the website: 13722361