Engineering, 16.11.2020 17:20 eweqwoewoji

It has been reported that Americans as a whole (300 million of us) ingest a total of approximately 8 tons/day of lead from corrosion of water pipes and lead-tin solder in older potable water distribution systems. The drinking water standard for lead is 0.05 mg/L total soluble lead. One method for removing heavy metals such as lead is pH adjustment to precipitate the metal hydroxide. Required:
a. Draw a diagram that shows the concentration of all the lead hydroxide complexes in a saturated solution.
b. Using the logarithmic concentration diagram, determine the minimum solubility of lead (in mg/L as Pb) in water.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.

Answers: 1

Answer

You know the right answer?

It has been reported that Americans as a whole (300 million of us) ingest a total of approximately 8...

Questions