Engineering, 18.11.2020 20:50 ricosuave42pf0gdn

Help me find my dad please ⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⣴⣶⣿⣿⣷⣶⣄⣀⣀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⣰⣾⣿⣿⡿⢿⣿⣿⣿⣿⣿⣿⣿⣷⣦⡀
⠀⠀⠀⠀⠀⠀⠀⢀⣾⣿⣿⡟⠁⣰⣿⣿⣿⡿⠿⠻⠿⣿⣿⣿⣿⣧
⠀⠀⠀⠀⠀⠀⠀⣾⣿⣿⠏⠀⣴⣿⣿⣿⠉⠀⠀⠀⠀⠀⠈⢻⣿⣿⣇⠀⠀⠀
⠀⠀⠀⠀⢀⣠⣼⣿⣿⡏⠀⢠⣿⣿⣿⠇⠀⠀⠀⠀⠀⠀⠀⠈⣿⣿⣿⡀⠀⠀
⠀⠀⠀⣰⣿⣿⣿⣿⣿⡇⠀⢸⣿⣿⣿⡀⠀⠀⠀⠀⠀⠀⠀⠀⣿⣿⣿⡇⠀⠀
⠀⠀⢰⣿⣿⡿⣿⣿⣿⡇⠀⠘⣿⣿⣿⣧⠀⠀⠀⠀⠀⠀⢀⣸⣿⣿⣿⠁⠀⠀
⠀⠀⣿⣿⣿⠁⣿⣿⣿⡇⠀⠀⠻⣿⣿⣿⣷⣶⣶⣶⣶⣶⣿⣿⣿⣿⠃⠀⠀⠀
⠀⢰⣿⣿⡇⠀⣿⣿⣿⠀⠀⠀⠀⠈⠻⣿⣿⣿⣿⣿⣿⣿⣿⣿⠟⠁⠀⠀⠀⠀
⠀⢸⣿⣿⡇⠀⣿⣿⣿⠀⠀⠀⠀⠀⠀⠀⠉⠛⠛⠛⠉⢉⣿⣿⠀⠀⠀⠀⠀⠀
⠀⢸⣿⣿⣇⠀⣿⣿⣿⠀⠀⠀⠀⠀⢀⣤⣤⣤⡀⠀⠀⢸⣿⣿⣿⣷⣦⠀⠀⠀
⠀⠀⢻⣿⣿⣶⣿⣿⣿⠀⠀⠀⠀⠀⠈⠻⣿⣿⣿⣦⡀⠀⠉⠉⠻⣿⣿⡇⠀⠀
⠀⠀⠀⠛⠿⣿⣿⣿⣿⣷⣤⡀⠀⠀⠀⠀⠈⠹⣿⣿⣇⣀⠀⣠⣾⣿⣿⡇⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠹⣿⣿⣿⣿⣦⣤⣤⣤⣤⣾⣿⣿⣿⣿⣿⣿⣿⣿⡟⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠉⠻⢿⣿⣿⣿⣿⣿⣿⠿⠋⠉⠛⠋⠉⠉⠁

Help me find my dad please

⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⣴⣶⣿⣿⣷⣶⣄⣀⣀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⣰⣾⣿⣿⡿⢿⣿⣿⣿⣿⣿⣿⣿⣷⣦⡀
⠀⠀⠀⠀⠀⠀⠀⢀⣾⣿⣿⡟

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

Answer

You know the right answer?

Help me find my dad please ⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⣴⣶⣿⣿⣷⣶⣄⣀⣀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⣰⣾⣿⣿⡿⢿⣿⣿⣿⣿⣿⣿⣿⣷⣦⡀

Questions