subject
Engineering, 25.11.2020 14:20 ijohnh14

Moist air enters a control volume operating at steady state witha volumetric flow rate of 3500 ft3/min. The moist air enters at 120°F,1.2 atm, and 75% relative humidity. Heat transfer occurs through asurface maintained at 50°F. Saturated moist air and condensate exitthe control volume, each at 68°F. Assuming Wcv = 0, and kinetic andpotential energy effects are negligible, determine: a. the mass flow rate of condensate, in lb/min.
b. the rate of heat transfer, in Btu/min.
c. the rate of entropy production, in Btu/R - min.
d. the rate of exergy destruction, in Btu/min, for T0 = 50 degrees F.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
question
Engineering, 04.07.2019 19:20
Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?
Answers: 2
You know the right answer?
Moist air enters a control volume operating at steady state witha volumetric flow rate of 3500 ft3/m...
Questions
question
Biology, 18.01.2022 20:00
Questions on the website: 13722362