Engineering, 07.12.2020 01:00 mtolds1952
Distinguish the differences between lumped and distributed parameters of a transmission line
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
Distinguish the differences between lumped and distributed parameters of a transmission line...
Questions
Mathematics, 19.03.2020 10:57
Business, 19.03.2020 10:57
Mathematics, 19.03.2020 10:58
Chemistry, 19.03.2020 10:58
Social Studies, 19.03.2020 10:58
Mathematics, 19.03.2020 10:58
Mathematics, 19.03.2020 10:59
French, 19.03.2020 11:00
Mathematics, 19.03.2020 11:00
English, 19.03.2020 11:00
Chemistry, 19.03.2020 11:01
Mathematics, 19.03.2020 11:01
Mathematics, 19.03.2020 11:01
