b.) sponges
Engineering, 15.12.2020 17:10 avaverretkj
Used must be hot drained for 12 hours or crushed before disposal.
a.) towels
b.) sponges
c.) mops
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Used must be hot drained for 12 hours or crushed before disposal.
a.) towels
b.) sponges
b.) sponges
Mathematics, 11.06.2021 20:50
Mathematics, 11.06.2021 20:50
Mathematics, 11.06.2021 20:50
Mathematics, 11.06.2021 20:50
English, 11.06.2021 20:50
Biology, 11.06.2021 20:50
Mathematics, 11.06.2021 20:50
Mathematics, 11.06.2021 20:50
Mathematics, 11.06.2021 20:50
Mathematics, 11.06.2021 20:50