Engineering, 16.12.2020 08:50 saucyboyFredo

╭╮╱╭╮╱╱╭╮╭╮ ┃┃╱┃┃╱╱┃┃┃┃
┃╰━╯┣━━┫┃┃┃╭━━╮
┃╭━╮┃┃━┫┃┃┃┃╭╮┃
┃┃╱┃┃┃━┫╰┫╰┫╰╯┃
╰╯╱╰┻━━┻━┻━┻━━╯Guys.

╭━━━╮╱╱╭╮╭╮
┃╭━━╯╱╱┃┃┃┃
┃╰━━┳━━┫┃┃┃╭━━┳╮╭╮╭╮
┃╭━━┫╭╮┃┃┃┃┃╭╮┃╰╯╰╯┃
┃┃╱╱┃╰╯┃╰┫╰┫╰╯┣╮╭╮╭╯
╰╯╱╱╰━━┻━┻━┻━━╯╰╯╰╯

╭━╮╭━╮
┃┃╰╯┃┃
┃╭╮╭╮┣━━╮
┃┃┃┃┃┃┃━┫
┃┃┃┃┃┃┃━┫
╰╯╰╯╰┻━━

I am new

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?

Answers: 3

Answer

You know the right answer?

╭╮╱╭╮╱╱╭╮╭╮ ┃┃╱┃┃╱╱┃┃┃┃
┃╰━╯┣━━┫┃┃┃╭━━╮
┃╭━╮┃┃━┫┃┃┃┃╭╮┃
┃┃╱┃┃┃━┫╰┫╰┫╰╯┃
╰╯╱╰┻━━...

Questions