subject
Engineering, 18.12.2020 01:00 jaidencoolman7072

The manufacturer of the X-15 steel-belted redial truck tire claims that the mean mileage the tire can be driven before the tread wears out is at least 60,000 miles.
Crosset Truck Company bought a sample of 48 tires and found that the mean
mileage for its trucks is 59,000 miles (i. e. less than the manufacturer’s claim) with
a standard deviation of 5,000 miles.
1) Test the manufacturer’s claim at a significance level (α) equals 5%.
2) Would your answer in part (1) change if the probability of type I error
equals zero? Justify your answer.

| P a g e 2
3) Would your answer in (1) change if the confidence level changes to be
99%. Justify your answer with proper test.
4) Another engineer has argued that tiers are considered to be fully
consumed after 120000 mileage, test this claim at significance level of
10%.
5) If the manager of a store is thinking about establishing a new billing
system for the store's credit costumers. After a thorough financial analysis,
she determines that the new system will be cost effective only if the mean
monthly income is more than 170£. A random sample of 400 monthly
accounts is drawn, for which the sample mean is 178£. The manager
knows that the accounts are normally distributed with standard deviation
of 65£. Can the manager conclude from this that the new system will be
cost-effective at significance level (α) equals 5%.?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
You know the right answer?
The manufacturer of the X-15 steel-belted redial truck tire claims that the mean mileage the tire c...
Questions
question
Mathematics, 19.11.2020 23:30
question
Mathematics, 19.11.2020 23:30
question
English, 19.11.2020 23:30
question
Mathematics, 19.11.2020 23:30
Questions on the website: 13722360