Engineering, 22.12.2020 01:00 cherkaouinazihp387bk
Knowing a .02 in gap exists when the temperature is 75 degrees F, determine
(a) the temperature at which the normal stress in the aluminum bar will be equal to -11ksi,
(b) the corresponding exact length of the aluminum bar.
Bronze Aluminum
A = 2.4 in^2 A=2.8 in^2
E=15x10^6 psi E=10.6x10^6
alph=12x10^-6/F alpha=12.9x^-6/F
L=14in L=18in
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
Knowing a .02 in gap exists when the temperature is 75 degrees F, determine
(a) the temperature at...
Physics, 15.10.2019 10:20
Social Studies, 15.10.2019 10:20
Mathematics, 15.10.2019 10:20
History, 15.10.2019 10:20
History, 15.10.2019 10:20
Biology, 15.10.2019 10:30
Mathematics, 15.10.2019 10:30
Mathematics, 15.10.2019 10:30