subject
Engineering, 23.12.2020 18:20 toxsicity

Question # 1 File Upload

In your memo, be sure to discuss the amount of creativity exercised in selecting materials like these. Also reference the article you read.

Submit your work.
New Directions in Residential Construction
Several states and their communities suffered devastation following Hurricane Katrina. Thousands of homes were destroyed or so impregnated with mold following the flooding that they became permanently uninhabitable. The Federal Emergency Management Agency (FEMA), which is part of the Department of Homeland Security has been working with state and local governments to develop innovative and affordable modular housing that can be moved from one location to another with minimal expense. Read this article on cutting-edge modular homes: about the Alabama pilot project on the FEMA website at https://www. fema. gov/alabama-alternative-housing-pil ot-program

You work for a high-end residential construction firm. In the past, "modular homes" was a buzzword for "trailer home" and definitely nothing a residential construction firm like yours would want to be associated with, but times are changing. People are asking for new options and wanting to leave a smaller carbon footprint, for one thing. Another issue is that clients are asking about using recycled and reused materials in their home design, and asking that your firm create designs with these materials.

Your boss wants you to research the potential of designing and creating high-end modular homes for clients.

In a short paper written like an informal memo to your boss, take a position on the following:

whether your firm should start creating cutting-edge modular home designs; and
whether your firm should start creating designs with recycled and reused materials in used builds.
In your memo, be sure to discuss the amount of creativity exercised in selecting materials like these. Also reference the article you read. It is fine to use a conversational tone and the first person, and even to use bullet points and lists.

You should be able to answer these questions thoroughly in two pages or less.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
question
Engineering, 04.07.2019 18:20
Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)
Answers: 2
You know the right answer?
Question # 1 File Upload

In your memo, be sure to discuss the amount of creativity exerc...
Questions
question
Mathematics, 08.04.2021 20:10
Questions on the website: 13722362