Engineering, 29.12.2020 14:00 webbhlharryteach
a centrifugal pump delivers water at the rate of 50kg/is . the inlet and outlet pressure are 2 bar and 6.2 bar respectively. the suction is 2.2 m below the center of the pump and delivery is 8.5 m above the above the center of the pump. the suction and delivery pipe diameter are 200 mm and 100 mm respectively. determine the capacity of the electric motor considering the efficiency of motor as 80℅to run the pump.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 19:10
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
You know the right answer?
a centrifugal pump delivers water at the rate of 50kg/is . the inlet and outlet pressure are 2 bar a...
Questions
Social Studies, 10.03.2021 20:10
History, 10.03.2021 20:10
Mathematics, 10.03.2021 20:10
Mathematics, 10.03.2021 20:10
Business, 10.03.2021 20:10
Mathematics, 10.03.2021 20:10
