Engineering, 14.01.2021 14:00 dprajapati832000
A tensile specimen has strength coefficient K = 700 MPa. This specimen begins to neck at a true strain = 0.15. Determine UTS true, UTS engineering
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
A tensile specimen has strength coefficient K = 700 MPa. This specimen begins to neck at a true stra...
English, 15.07.2020 05:01
Mathematics, 15.07.2020 05:01
English, 15.07.2020 05:01
Mathematics, 15.07.2020 05:01
History, 15.07.2020 05:01
Mathematics, 15.07.2020 05:01
History, 15.07.2020 05:01
Mathematics, 15.07.2020 05:01
Mathematics, 15.07.2020 05:01