Engineering, 18.01.2021 14:00 rdemp6105
A copper bare wire, stranded, size 4/0 AWG is being tested in a laboratory (free air test), where the ambient temperature is 30 C (86 F). It is assumed that the damage temperature for this wire is 200 C. According to the results of previous tests, a factor h = 28 W/(γ‘ K) can be used for a simplified first-order approximation. Using the simplified model described in class:
a. Determine what would be the cable's ampere rating (IN) for a rated temperature of 65 C and the given ambient temperature
b. Determine the cable's minimum damage current (Id)
c. Determine the rt=Ky of the wire (approximated damage curve)
d. Plot the approximated damage curve in a log-log scale
e. Plot the "exact" (Approximation 1) damage curve in the same graph and compare. For which current value the two curves are practically equal?
f. Determine and plot the second approximation for the damage curve (T-Ind27t=K',d). Compare the plots of all the three damage curves
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
A copper bare wire, stranded, size 4/0 AWG is being tested in a laboratory (free air test), where th...
Chemistry, 02.01.2021 05:10
Health, 02.01.2021 05:10
Mathematics, 02.01.2021 05:10
Mathematics, 02.01.2021 05:10
Computers and Technology, 02.01.2021 05:10
Mathematics, 02.01.2021 05:10
Mathematics, 02.01.2021 05:10
Mathematics, 02.01.2021 05:10
Computers and Technology, 02.01.2021 05:10