subject
Engineering, 21.01.2021 14:00 feeandra

Technician A says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. Technician B says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. Who is correct?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 06.07.2019 02:30
A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.
Answers: 1
question
Engineering, 06.07.2019 03:30
Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?
Answers: 1
question
Engineering, 06.07.2019 03:30
Acubic shaped box has a side length of 1.0 ft and a mass of 10 lbm is sliding on a frictionless horizontal surface towards a 30 upward incline. the horizontal velocity of the box is 20 ft/s. determine how far up the incline the box will travel (report center of mass distance along the inclined surface, not vertical distance)
Answers: 1
question
Engineering, 06.07.2019 03:30
The load on a bolt consists of an axial pull of 10 kn together with a transverse shear force of 5 kn. the bolt material has a yield strength of syt syc 100 mpa. find the diameter of the bolt at factor of safety n-0.5, n 1 and n-2 using maximum shear stress theory
Answers: 3
You know the right answer?
Technician A says that in a worm gear steering system, most excessive steering free play is usually...
Questions
Questions on the website: 13722363