From a tension test, the experimental data (true strain – true stress) are: True Strain True Stress (MPa) 0.01 69.0 0.03 119.5 0.06 169.0 0.1 218.2 0.15 267.2 0.2 308.6 0.25 345.0 0.3 378.0 0.35 408.2 0.4 436.4 0.45 462.9 0.5 488.0 0.8 617.0 Define the Strength coefficient (K) and strain hardening exponent (n) representing a power law true stress/strain curve (σ=KƐ n )

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Wiy doeres rere okhn a pump whon working betwon the same pressure range?