Engineering, 25.01.2021 14:00 lamwil9432

1. For a cantilever beam, the slop of the downward deflection y (m) with a load w (kg/m) can be computed as / =/24(43 − 12 2 + 12 2), where x = distance (m), E = the modulus of elasticity 1.0 ×10^11 Pa, I = moment of inertia 4.0×10^–4 m^4, w = 1.0×10^4 N/m, and L = length = 4.0 m. If y=0 at x=0, use Euler’s method (Δx=0.4 m) to compute the deflection from x=0 to L. List your results in a table and calculate the absolute error for each step (please express y in scientific notation).

1. For a cantilever beam, the slop of the downward deflection y (m) with a load w (kg/m) can be com

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w

Answers: 2

Answer

You know the right answer?

1. For a cantilever beam, the slop of the downward deflection y (m) with a load w (kg/m) can be comp...

Questions