Engineering, 31.01.2021 21:00 NewKidnewlessons
The tool life decreases from 0.8 min to 0.2 min due to the increase in cutting speed from 60 m/min to 120 m/min in a turning operation.
Compute is the value of the cutting speed at 0.4 min.
a-)Determine the spindle speed in rpm.
b-)Find the required power for the unit force.
c-)The friction between tool and workpiece varies 0.25-0.35 during the process.
d-)Calculate the rate of maximum force to minimum force.
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
The tool life decreases from 0.8 min to 0.2 min due to the increase in cutting speed from 60 m/min t...
History, 28.01.2020 01:31
Mathematics, 28.01.2020 01:31
Mathematics, 28.01.2020 01:31
Advanced Placement (AP), 28.01.2020 01:31
Social Studies, 28.01.2020 01:31
Mathematics, 28.01.2020 01:31
Mathematics, 28.01.2020 01:31
Mathematics, 28.01.2020 01:31
Mathematics, 28.01.2020 01:31
History, 28.01.2020 01:31