Which option distinguishes the step in the engineering design phase described in the following scenarlo? Saul uses TurboCAD to produce engineering drawings that provide every detail of the new hockey helmet technology
and test the design in a virtual environment.
brainstorming solutions
researching the problem
doing an analysis
defining the need

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa