A freezer compartment consists of a cubical cavity that is 2 m on a side. Assume the bottom to be perfectly Problems 49 CH001.qxd 2/24/11 12:03 PM Page 49 insulated. What is the minimum thickness of styrofoam insulation (k 0.030 W/m K) that must be applied to the top and side walls to ensure a heat load of less than 500 W, when the inner and outer surfaces are 10 and 35 C

30 mm is the minimum thickness that must be applied.

Explanation:

Given the data in the question;

Using Fourier's equation. the heat rate is  

q = kA(ΔT/Δx)

where

A is the surface area, we must consider all surfaces through which the heat can dissipate through

i.e 2×2 for one wall gives you 4m²,

there are 5 walls, so we will  have 20m² for surface area.

k is thermal conductivity of the styrofoam ( 0.030 W/m K)    

q is the heat loss (500 W  )

ΔT is the Temperature difference ( 35 - 10) = 25°C

Δx  = ?

So we substitute

500 = (0.030)(20)(25/Δx)

500 = 0.6 (25/Δx)

500 = 15 / Δx

Δx = 15 / 500

Δx = 0.03 m = 30 mm

Therefore, 30 mm is the minimum thickness that must be applied.

i mean i gues

explanation:

answer:

an example of solubility is salt or sugar dissolving in water.

rate as brainliest plz