Engineering, 08.02.2021 20:20 horsedoggal1234

Determine the structural loads in truss members AD, AE, BE, CD, CE, and DE. b) Assuming that the truss members will all be constructed of 4130 alloy steel tubing, propose a cross-sectional geometry for each truss member that provides the following safety factors (FoS) - FoS of at least 3 against yielding, and - FoS of at least 1.5 against buckling. The cross-sectional geometry must be of standard stock sizes readily available from suppliers, such as OnlineMetals. c) Calculate the actual FoS for outer truss sections under the maximum defined loads based on your geometry selection(s). d) Estimate the material cost per truss sub-se

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

Engineering, 06.07.2019 03:10

Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c

Answers: 1

Answer

You know the right answer?

Determine the structural loads in truss members AD, AE, BE, CD, CE, and DE. b) Assuming that the tru...

Questions