A special C-clamp uses a 0.5- in.-diameter Acme thread and a collar of 0.625-in. effective mean diameter. The collar is attached rigidly to the top end of the externally threaded member. Determine the force required at the end of the 6- in. handle to develop a 150-lb clamping force.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Burgers vector is generally parallel to the dislocation line. a)-true b)-false