Engineering, 09.02.2021 01:00 slonzyy8397

The composite wall of an oven consists of three materials, two of which are of known thermal conductivity, kA = 25 W/m ⋅ K and kC = 60 W/m ⋅ K, and known thickness, LA = 0.40 m and LC = 0.20 m. The third material, B, which is sandwiched between materials A and C, is of known thickness, LB = 0.20 m, but unknown thermal conductivity kB. Under steady-state operating conditions, measurementsreveal an outer surface temperature of Ts, o =20ºC, an inner surface temperature of Ts, i= 600ºC, and an oven air temperature ofT¥=800ºC. The inside convection coefficienth is known to be 25 W/(m^2•K). What isthe value of kB?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

You know the right answer?

The composite wall of an oven consists of three materials, two of which are of known thermal conduct...

Questions