subject
Engineering, 09.02.2021 22:10 jaass28

Which is the maximum length for any opening on the surface of a 2G SMAW guided bend test specimen? O 1/3 inch
O 1/4 inch
O 1/8 inch
O 1/2 inch

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
question
Engineering, 06.07.2019 03:30
State the stress optic law in two dimension and obtain an expression for the same.
Answers: 2
question
Engineering, 06.07.2019 04:10
Aheat pump that operates on the ideal vapor compression cycle with refrigerant-134a is used to heat water from 15°c to 45°c at a rate of 0.12 kg/s. the condenser and evaporator pressures are 1.4 and 0.32 mpa, respectively determine: (a) the power input to the heat pump
Answers: 1
question
Engineering, 06.07.2019 04:10
Steam enters a converging-diverging nozzle at 1.0 mpa and 500°c with a negligible velocity at a mass flow rate of 2.5 kg/s, and it exits at a pressure of 200 kpa. assuming the flow through the nozzle to be isentropic, determine: the exit area and (a) (b) the exit mach number
Answers: 2
You know the right answer?
Which is the maximum length for any opening on the surface of a 2G SMAW guided bend test specimen?...
Questions
question
Mathematics, 13.02.2022 06:50
question
Mathematics, 13.02.2022 07:00
question
Business, 13.02.2022 07:00
question
Physics, 13.02.2022 07:00
Questions on the website: 13722362