Engineering, 11.02.2021 04:10 MariahTheAnn
A circular shape blank will be cut of 100 mm diameter from a strip of 2.8 mm with a clearance value of 0.25 mm. Take the shear strength as 400 MPa.
Determine:
a) The appropriate punch diameter.
b) Blanking force.
c) Blanking force when the blade angle is (5)o.
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
A circular shape blank will be cut of 100 mm diameter from a strip of 2.8 mm with a clearance value...
English, 19.08.2020 14:01
Computers and Technology, 19.08.2020 14:01
Mathematics, 19.08.2020 14:01
Mathematics, 19.08.2020 14:01
English, 19.08.2020 14:01
History, 19.08.2020 14:01
Chemistry, 19.08.2020 14:01
Health, 19.08.2020 14:01
Mathematics, 19.08.2020 14:01