Engineering, 11.02.2021 17:40 caitlinsanders
material that has a fracture toughness of 33 MPa-m0.5 is to be made into a large panel that is 2000 mm long by 250 mm wide and 4 mm thick. If the minimum allowable total crack length is 4 mm, what is the maximum tensile load in the long direction that can be applied without catastrophic failure with a safety factor of 2.5
Answers: 1
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
Engineering, 06.07.2019 02:30
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
Engineering, 06.07.2019 04:10
Agas mixture with a compostion of 55 methane, 30% propane, and 15 butane by volume) is compressed from 1 bar and 25°c to 9bar in a compressor with an isentropic efficiency of 85%. the environment has a temperature of to25 c. determine (a) the exit temperature of the mixture (b) the specific work required to run the compressor (c) the specific entropy generation of the process (d) the specific exergy destruction of the process (e) the second law efficiency of the compressor
Answers: 3
material that has a fracture toughness of 33 MPa-m0.5 is to be made into a large panel that is 2000...
Business, 30.01.2020 09:53
Mathematics, 30.01.2020 09:53
Computers and Technology, 30.01.2020 09:53
Mathematics, 30.01.2020 09:53
Physics, 30.01.2020 09:53
Health, 30.01.2020 09:53
Mathematics, 30.01.2020 09:53
Mathematics, 30.01.2020 09:53
Physics, 30.01.2020 09:53
Social Studies, 30.01.2020 09:53
Geography, 30.01.2020 09:53
Mathematics, 30.01.2020 09:53