An automobile having a mass of 1100 kg initially moves along a level highway at 120 km/h relative to the highway. It then climbs a hill whose crest is 80 m above the level highway and parks at a rest area located there. Use a reference with kinetic and potential energy each equal to zero for the stationary highway before the hill. Let g = 9.81 m/s^2. For the automobile, determine its change in kinetic energy and its change in potential energy, both in kJ. For the automobile, determine its change in kinetic energy, in kJ.
a. -8594
b. -663.1
c. -6.63x10^5
d. 663.1

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?