subject
Engineering, 11.02.2021 21:10 SymiaF4980

A nuclear power station is situated in Coal Valley, which is a roughly rectangular valley that is 5 km long, 2 km wide, and 200 m deep. You have been asked to evaluate the effects of a worst- case scenario where the reactor housing fails, and radiation is released to the atmosphere. In your evaluation, you determine that 120 kg of lodine-131 (a radioisotope that causes thyroid gland and liver damage) could be released into the atmosphere. a. Assuming the release of lodine-131 was very rapid and all of it was uniformly distributed through the valley's atmosphere with none escaping the valley, what would the concentration of lodine-131 be in the valley's air? Your answer should be expressed in units of ppmv, and you may assume an atmopheric pressure of 1.0 atm and a temperature of 20°C.
b. Assuming the lodine-131 concentration you calculated in part (a) is the initial concentration in the valley, you now want to determine the time it will take for the concentration to decrease to the safe limit of 1.0% 10-5 ppmv. The average windspeed through the valley (entering at one end and exiting at the other) is only 1.5 m/min. However, lodine-131 also is removed by two other processes: 1) radioactive decay with a half life of 8.1 days, and 2) sedimentation to the ground with a rate constant of 0.02 d^-1. Draw a picture of the situation, and label the appropriate.
c. Now derive an equation that expresses the concentration of lodine-131 in the valley's air as a function of the time since the accident. Use the equation to determine the time needed for the concentration to decrease to a safe level.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 06.07.2019 03:20
Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.
Answers: 2
question
Engineering, 06.07.2019 04:10
Apinion having 30 involute teeth of 6,5 module rotates at 220 r/min and transmits 2 kw to a gear wheel having 70 teeth; the addendum on both wheels is 4 of the circular pitch and the angle of obliquity is 200. determine; 3.1 the lengths of the path of approach and the arc of approach 3.2 the normal force between the teeth at an instant when there is only one pair of teeth in contact
Answers: 2
You know the right answer?
A nuclear power station is situated in Coal Valley, which is a roughly rectangular valley that is 5...
Questions
question
Mathematics, 01.02.2022 05:20
question
English, 01.02.2022 05:20
question
Mathematics, 01.02.2022 05:20
question
English, 01.02.2022 05:20
Questions on the website: 13722362