Engineering, 12.02.2021 16:20 gjfhjgg2848

A vertical curve crosses a 4-ft diameter pipe at right angles. This pipe is located at station 110+85 and its center, where it crosses the road, is at elevation 1091.60ft. The PVI of the vertical curve is at station 110+00 and elevation 1098.4ft. The vertical curve is 600ft long and connects an initial grade of 1.2% and a final grade of -1.08%. Determine the depth, below the surface of the curve, of the top of the pipe and determine the station of the highest point on the curve. Does the curve in provide sufficient stopping sight distance for a speed of 60mph? Assume a deceleration rate of 11.2ft/sec2.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view

Answers: 2

Answer

Engineering, 04.07.2019 19:20

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

Answer

You know the right answer?

A vertical curve crosses a 4-ft diameter pipe at right angles. This pipe is located at station 110+8...

Questions