Engineering, 12.02.2021 17:40 Zgt
Which of the following correctly describes caster?
A) The amount of tilt in the steering knuckle or steering axis from true vertical as viewed
from the side of the vehicle.
B) The inward or outward tilt of the top of the wheel from true vertical as viewed from the
front of the vehicle.
C) The amount that the wheels point inward or outward as viewed from the top of the
wheel looking down
D) The tilt of the steering axis when viewed from the front of the vehicle,
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
Engineering, 06.07.2019 03:20
Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.
Answers: 2
You know the right answer?
Which of the following correctly describes caster?
A) The amount of tilt in the steering knuckle or...
Questions
Health, 15.12.2019 18:31
Mathematics, 15.12.2019 18:31
Mathematics, 15.12.2019 18:31
Biology, 15.12.2019 18:31
Mathematics, 15.12.2019 18:31
Mathematics, 15.12.2019 18:31
Mathematics, 15.12.2019 18:31
Geography, 15.12.2019 18:31
