Engineering, 19.02.2021 16:20 ethancarter560

Show truth tables for each of the following. a. There are four inputs and twooutputs. The inputs, w, x, y, z, are codes for the grade that may be received:

0000 A+ 0100 A 1000 A- 1100 Incomplete
0001 B+ 0101 B 1001 B- 1101 Satisfactory
0010 C+ 0110 C 1010 C- 1110 Unsatisfactory
0011 D+ 0111 E 1011 XE 1111Pass

The outputs are
1: a 1 if and only if the grade is C or better (only letter grades; Câ€”is not C or better)
2: a 1 if and only if the university will count it toward the 120 credits required for a degree (passing grade only)
3: a 1 if and only if it will be counted in computing a grade point average (letter grades only).

b. The system has four inputs and three outputs. The first two inputs, a and b, represent a 2-bit binary number (range of 0 to 3). A second binary number (same range) is represented by the other two inputs, c and d. The output f is to be 1 if and only if the two numbers differ by exactly 2. Output g is to be 1 if and only if the numbers are equal. Output h is to be 1 if and only of the second number is larger than the first.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Prove the equivalence between the two statements of the 2nd law of thermodynamics (i.e., a violation of one statement leads to the violatio the other statement)

Answers: 2

Answer

Engineering, 04.07.2019 19:10

The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?

Answers: 1

Answer

You know the right answer?

Show truth tables for each of the following. a. There are four inputs and twooutputs. The inputs, w...

Questions