Engineering, 19.02.2021 17:00 lightsofthedarkness
Many changes to efficiency in fluid power systems can also lead to increased sustainability as fuel costs and carbon emissions decrease. True False
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Air flows over a heated plate Γ t a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Many changes to efficiency in fluid power systems can also lead to increased sustainability as fuel...
History, 03.08.2019 17:40
Spanish, 03.08.2019 17:40
Mathematics, 03.08.2019 17:40
Mathematics, 03.08.2019 17:40
Health, 03.08.2019 17:40
Arts, 03.08.2019 17:40
Business, 03.08.2019 17:40
Mathematics, 03.08.2019 17:40
Mathematics, 03.08.2019 17:50
Biology, 03.08.2019 17:50