Engineering, 22.02.2021 22:10 Isactuallycarter99
A solid steel shaft is to be designed to transmit 750 kW at 1,500 revolutions per minute. The steel selected is an AISI 1030, cold drawn (CD) steel. The shaft is 1 m long. Assume that the bending load on the shaft is negligible. (a) Using a factor of safety of 1.5, design the diameter of the shaft. (b) If instead of using a solid shaft, a hollow shaft with the inside diameter 0.8 times the outside diameter is used, will there be any weight saving
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
You know the right answer?
A solid steel shaft is to be designed to transmit 750 kW at 1,500 revolutions per minute. The steel...
Questions
Mathematics, 15.07.2021 20:00
Mathematics, 15.07.2021 20:00
Mathematics, 15.07.2021 20:00
Chemistry, 15.07.2021 20:00
Social Studies, 15.07.2021 20:00
