subject
Engineering, 23.02.2021 15:00 deadpoolcorvettehats

Reservoir rock system located between a depth of 2153m and a depth of 2383m , as the pressure at these depths is 18.200 MPa , 19.643 MPa
respectively the thickness of oil zone 103m, if the density of water is 1060 kg/m3
Determine the oil and gas density. what is the pressure at the depth of 2200m ?
what is the depth at which the pressure is 1900 MPa? Determine the gas-oil and
oil- water contact depth

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
You know the right answer?
Reservoir rock system located between a depth of 2153m and a depth of 2383m , as the pressure at th...
Questions
question
Mathematics, 04.08.2019 14:30
Questions on the website: 13722361