Engineering, 24.02.2021 21:50 xczapien782
Used oil should be . A) RecycledB) Poured onto grassC) Placed in a container with antifreezeD) Poured down the drain
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160Β°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Used oil should be .
A) RecycledB) Poured onto grassC) Placed in a container with antifreezeD) Pour...
Mathematics, 25.01.2020 04:31
Chemistry, 25.01.2020 04:31
Mathematics, 25.01.2020 04:31
Mathematics, 25.01.2020 04:31
Chemistry, 25.01.2020 04:31
Business, 25.01.2020 04:31
Social Studies, 25.01.2020 04:31
English, 25.01.2020 04:31