Engineering, 05.03.2021 17:50 cocoarockford
STRENGTH OF MATERIALS I
Tutorial Questions
Find the centre of gravity of a T-section with flange 150 mm x 10 mm and web also 150
mm x 10 mm.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
STRENGTH OF MATERIALS I
Tutorial Questions
Find the centre of gravity of a T-section with flan...
Find the centre of gravity of a T-section with flan...
History, 22.09.2020 04:01
Spanish, 22.09.2020 04:01
Mathematics, 22.09.2020 04:01
Mathematics, 22.09.2020 04:01
Computers and Technology, 22.09.2020 04:01
Mathematics, 22.09.2020 04:01
Mathematics, 22.09.2020 04:01
Mathematics, 22.09.2020 04:01
Mathematics, 22.09.2020 04:01
Mathematics, 22.09.2020 04:01