subject
Engineering, 08.03.2021 19:30 arthurcasella

A hydrocarbon feed flowing at a rate of 100 kg/h consisting of a mixture of propane (20%), isobutene (30%), isopentane (20%), and n-pentane (30%) is fractionated in a distillation column. The distillate contains all the propane and 78% of the isopentane in the feed. The mass fraction of isobutene in the distillate is 0.378. The bottom stream contains all the n-pentane fed to the unit. Determine the flow rate of the bottom stream.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
question
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
You know the right answer?
A hydrocarbon feed flowing at a rate of 100 kg/h consisting of a mixture of propane (20%), isobutene...
Questions
question
Chemistry, 21.09.2020 09:01
question
Mathematics, 21.09.2020 09:01
question
English, 21.09.2020 09:01
question
Mathematics, 21.09.2020 09:01
Questions on the website: 13722367