Engine oil flows at a rate of 1 kg/s through a 5-mmdiameter straight tube. The oil has an inlet temperature of 45 C and it is desired to heat the oil to a mean temperature of 80 C at the exit of the tube. The surface of the tube is maintained at 150 C. Determine the required length of the tube. Hint: Calculate the Reynolds numbers at the entrance and exit of the tube before proceeding with your analysi

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false