Engineering, 12.03.2021 03:10 fatboi82

Let’s get to debugging! The program you’re about to look at is supposed to be a simple game where the hedgehog has to rescue the good dinosaurs (in green) while avoiding being touched by the enemy dinosaurs (in red). The hedgehog receives points whenever a good dinosaur is touched, and points are taken away whenever a bad dinosaur is touched. You can use the up, down, left, and right arrows to make the hedgehog move toward the good dinosaurs accordingly. Follow this link to the game:

Scratch Game: Debugging

Try playing the game and be observant about what isn’t happening the way you thought it would.

There are two bugs in the program. Your job is to identify the problem blocks of code and fix them. Use the following steps.

Identify the problem blocks. You will have to click on the different sprites in the game to see their code.
Attempt to fix the problem code blocks. Check your fix by running the game again. Take screenshots of your code.
Describe the problem in the program and how you attempted to fix it, including whether you were successful.
Submit your screenshots and descriptions of how to fix the bugs.

TABLE Grading Rubric
Bug 1 Bug 2
Full Credit
Student identifies the first bug and submits screenshots and an explanation that demonstrates an understanding of how to fix the bug.

The student identifies the second bug and submits screenshots and an explanation that demonstrates an understanding of how to fix the bug.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

You know the right answer?

Let’s get to debugging! The program you’re about to look at is supposed to be a simple game where th...

Questions