subject
Engineering, 12.03.2021 14:50 tasiajm

g 1. The theory used to determine the maximum power of a wind turbine is (A) actuator theory, (B) Fourier theory, (C) Maxwell theory. 2. The maximum power that can be extracted by a wind turbine is (A) 0.2963, (B) 0.593, or (C) 0.5 of the available wind power. 3. The two types of HAWT are (A) , (B),and VAWT are (C) , and (D). 4. The tower shadow is one of major concern of (A) upwind turbine, (B) downwind turbine or (C) vertical wind turbine. 5. The advantages of VAWT are (A) does not need to turn toward the wind (B) all powertrain components in the ground level, and (C) very stable. 6. The self-starting VAWT is (A) Darrieus wind turbine (B) Savonius wind turbine or (C) straight blade wind turbine. 7. Smaller number of blade will require (A) higher starting speed, (B) lower starting speed, (C) can self-starting. 8. Since air flow is not confined, the interference factors are used to compensate the air flow through the blade and there are (A) and (B) 9. For a self-starting Savonius vertical wind turbine, it has relative (A) high torque or (B) low torque at low wind speed. 10. The overall power generated by a wind turbine can be determined by the linear average wind speed during the period which is (A) True, or (B) False.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
question
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
You know the right answer?
g 1. The theory used to determine the maximum power of a wind turbine is (A) actuator theory, (B) F...
Questions
question
Mathematics, 11.02.2020 20:42
Questions on the website: 13722362