Engineering, 12.03.2021 15:20 dontcareanyonemo
Tests are performed to determine the Tool Life of a high-speed steel single-edge cutting tool. At cutting speeds (v) of 180 m/min and 110 m/min the corresponding tool life is 4.25 min and 35 min., respectively. Except for the cutting speed, the cutting conditions in both tests are the same. Calculate the value of n in the Taylor Tool Life Equation. Answers are rounded to three (3) decimal places (x. xxx).
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 19:20
The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal
Answers: 3
Engineering, 04.07.2019 19:20
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
Engineering, 04.07.2019 19:20
Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?
Answers: 3
You know the right answer?
Tests are performed to determine the Tool Life of a high-speed steel single-edge cutting tool. At cu...
Questions
Chemistry, 04.07.2020 18:01
Biology, 04.07.2020 18:01
