Engineering, 12.03.2021 15:30 GgRed

Hydrochloric acid (HCI) diffuses through a thin film of water (2.0 mm thick) at 290 K The concentration of HCl at point l on one boundary of the film is 8% by mass and on the other end of the boundary, at point 2 is 5% by mass. Density of the solution mixture at points 1 and 2 are 1080 kg/m3 and 1060 kg/m3 respectively. The diffusivity of HCI in water is 2.6 x 10-8 m2/s. Calculate the molar flux of HCl assuming water to be stagnant. Assume that the net molar concentration remains almost constant across the film (or take an average of the concentrations on both sides of the film).

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:10

You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?

Answers: 1

Answer

Engineering, 04.07.2019 19:10

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

Answer

You know the right answer?

Hydrochloric acid (HCI) diffuses through a thin film of water (2.0 mm thick) at 290 K The concentrat...

Questions